November 2017
M T W T F S S
« Oct    
 12345
6789101112
13141516171819
20212223242526
27282930  
Thanks you
Flag Counter

Archive for November 9th, 2017

Tips on Using Engine Turbocharger it Right

Turbochargers are breathing engine car engine, because the turbocharger usually works in conditions of high speed and high temperature.

motorsport with turbochrger The final temperature of the exhaust gas turbocharger turbo is about hundreds of degrees Celsius, turbocharger rotors in high rotation speed of 850-1400 RPM, so as to protect the normal performance of the turbocharger, you should pay attention to the following points when using.

1. Do not immediately go away when the vehicle is started. Having driven the car engine, especially in the winter, you have to let it operate for a while without the speed, the neutral gear position. This could make the oil lubricates full pads before turbocharger rotor operates at high speed. So, do not step on the gas just weight after you start the vehicle, or you will damage the engine turbocharger oil seal.

2. Do not flame immediately. After the engine spins at high speed for a very long time, you can not flame immediately. While the engine works, part of the oil supplied to the rotor engine to lubricate and cool the turbocharger. After the engine stops as soon as the operation, engine oil pressure will reduce to zero quickly, and high temperature turbocharger parts will be changed to the middle, in the heat bearing shell support can not be taken quickly. And at the same time, the rotor spins at high speed in under the effect durability, so, if the engine is stopped immediately in hot conditions, the engine oil in the turbocharger will be too hot, and the bearing and shaft will be damaged because of it. So, you have to let him play for three to five minutes.

3. Keep clean the turbocharger. While the turbocharged engine repair, you have to keep it clean, or it will hurt the rotor while foreign objects into the engine.

4. Always wash and clean. Because the turbocharger is always spinning at high temperatures, so the engine oil in it is easy to form coke in part, and this will result in damage to bearing wear out due to lack of lubricant. So, you need to wash and clean for future operations certainty.

5. Pay attention to the usual operating conditions. Before or after driving, you have to check the condition of each pipe connection to prevent the use of liquid engine turbocharger for loose and broken.

I would like to remind you that this technique applies to all turbine engines including turbocharger Garrett, H Series turbocharger, IHI turbocharger, GT Series turbocharger, turbocharger K series, TB Series turbocharger, TD Series turbocharger.